4 877.426.2504 / workholding@jergensinc.com How the Ball-Lock Mounting System works. MACHINE TABLES come in various sizes, t-slot sizes, number of t-slots and also drilled & tapped configurations. SUBPLATES can be made to suit your needs in addressing your manufacturing quick-change requirements. SINE FIXTURE KEYS are used to align the subplate to a t-slotted table during the installation of the subplate to your machine table. T-SLOT NUTS are used in the fastening of the subplate to the machine table. SOCKET HEAD CAP SCREW’S are installed thru the subplate and into the t-slot nots to lock down the subplate to the machine table. BALL-LOCK BASE VISES OR FIXTURE PLATES allow you to change out your vises or fixture in minutes within +/-.0005 repeatability versus hours of set-up and indicating in the vise or fixture. BALL-LOCK SHANKS are used to locate and lock the vises or fixtures to the receiver bushings installed in the subplate with 2-1/2 turns to lock or release with low torque and high clamping forces. SUBPLATE MACHINE TABLE T-SLOT NUTS SOCKET HEAD CAP SCREWS BALL-LOCK BASE VISES OR FIXTURE PLATES BALL-LOCK SHANKS SINE FIXTURE KEYS
RkJQdWJsaXNoZXIy NzI2NjY=