The MT-S achieves a fully automatic workpiece change during the machining process on a machine tool. It is changed from the tool magazine of the milling machine and enables workpiece handling between the part storage and the clamping device. It is actuated by means of cooling lubricant, which is routed through the machine spindle. The gripper closes hydraulically and opening takes place by means of spring force. █ The gripping force can easily be adjusted by means of throttles and thereby adapted to the relevant requirements of the workpieces █ Easily exchangeable gripper inserts for handling various workpiece geometries █ Easy implementation of unmanned shifts, which means greater machine utilization and more flexibility █ Tremendous reduction of set-up times for smaller to medium-sizes batches █ Notes: █ Max permitted speed: 20 rpm █ Suitable for weldon holders and hydraulic expansion chucks █ Designed for ambient temperatures from 32º F to 140º F █ Transportation of workpieces up to a max of 8 kg (17.6 lb) Hydraulic MT-S Without Compensation Unit Part Number Min Operating Pressure bar (psi) Max Operating Pressure bar (psi) Stroke mm Gripping Force N (lb) D mm D1 mm Interference Zone Ds mm L1 mm L3 mm Gripper Extension L5 mm Weight (kg) 569963 45 (652) 50 (725) 23 250, 500, 1000 (56, 112, 225) 80 16 80 53 50 80 1.76 QUICK CHANGE FIXTURING - ZERO POINT MOUNTING SYSTEM Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA W118-P1 AUTOMATION workholding solutions ATUTOMATION 118
RkJQdWJsaXNoZXIy NzI2NjY=