UNIVERSAL BASE PRODUCTION VISE 4" / 100MM 1.22 [30] 3.370 [85.6] 1.25 [32] 4.00 [100] 7.00 [175] 6.00 [150] 17/32" (4) Plcs [13.5] Slotted Mounting Holes: 3.13 [80] 2.50 [63.5] 6.00 [150] 2.063 [52.5] Mounting Holes (2) Plcs: 17/32" [13.5] Locating Holes: .6255 (4) Plcs For Sine Fixture Keys [16] Production Vises – 4"(100mm) Narrow Base Universal Base The Universal Base Vise is easily mounted directly to machine tool tables. Slotted mounting holes will match almost any table slot pattern. Location holes are provided for Jergens Sine Fixture Keys, to provide easy and accurate alignment with table slots. • Easy to mount directly to machine tables The Narrow Base Vise can be mounted as a stand-alone vise with traditional strap clamps. The narrow base has 2 locating holes for 12mm dowel pins and 2 locating holes for sine xture keys to align vise in T-slots. Keys for inch and metric T-slots shown on page 172. Recessed mounting holes (3) are also provided for top mounting to xture plates with socket head cap screws. Tapped mounting holes (6) are provided for bottom mounting. The slim design allows a high density of vises on machine tables, tombstones, or columns. Maximize exibility by utilizing the Jergens Ball Lock® Quick Change Mounting System. See page 138. • Easy to mount to Ball Lock® or other xture plates Mounting Dimensions Mounting Dimensions Part No. Wt. lbs/Kg 49401 30/14 Part No. Wt. lbs/Kg 49471 30/14 PRODUCTION VISES PRODUCTION VISES workholding solutions Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: info@jergensinc.com | www.jergensinc.com 141
RkJQdWJsaXNoZXIy NzI2NjY=