1.75 [38] 4.00 [100] 10.00 [248] .96 [24] .50 TYP [12] 4.50 [114] .60 [15] 5.00 [127] 10.00 [254] 3.00 [78] .25 [6] 1.45 [37] Machinable Area .56 [14] 22.56 [573] 11.00 [280] 1.00 [25] 3.50 [88] 1.00 [25] J Q H Ball Lock® Mtg. Pattern Production Vise Columns – 6"(150mm) • 3 or 4-Sided Columns • Multiple mounting systems • Fastest quick-change jaw system • Full jaw travel • Hardened stainless steel rails support jaws and resist wear • Fully sealed lead screw assembly • Supplied with machinable soft jaws • Available with hard jaws Column With Soft Jaws Column With Hard Jaws Production Vise Columns – 6"(150mm) 4-Sided The 4-Sided Columns are the workhorses of the Jergens Production Vise Columns. They have eight stations for holding your parts. Two standard bases are available. The universal base will mount directly to most HMC tables, using the provided mounting holes on 80mm or 100mm centers. Further reduce set-up times by adding the Jergens Ball Lock® Mounting System to your HMC. Exchange your vise columns and any other xture in less than a minute. Location of all xtures will repeat within ±0.0005"(±0.013mm) or better. Clamping Force Jergens 6"(150mm) 4-Sided 6"(150mm) Vise Columns Mounting Part Number H J Q Base Width Base Length Ball Lock® Mtg Pattern Mounting Pattern 1* Mounting Pattern 2* Mounting Pattern 3* Weight (lbs) Ball Lock® Part No. Shank Size Ball Lock® 49412 11.50 6.00 2.75 15.75 15.75 14 x 14 n/a n/a n/a 244 49602 20mm x 1" Ball Lock® 49404 11.50 6.00 2.75 19.68 19.68 17 x 17 n/a n/a n/a 258 49612 25mm x 1" Universal 49476 11.50 6.00 2.75 15.75 15.75 n/a 80mm 100mm 125mm 235 — — 4-Sided 150mm Vise Columns Metric Bases Mounting Part Number H J Q Base Width Base Length Ball Lock® Mtg Pattern Mounting Pattern 1* Mounting Pattern 2* Mounting Pattern 3* Weight (Kg) Ball Lock® Part No. Shank Size Ball Lock® 69412 290 150 70 400 400 350 x 350 n/a n/a n/a 111 49652 20mm x 25mm Ball Lock® 69404 290 150 70 500 500 425 x 425 n/a n/a n/a 117 49662 25mm x 25mm Universal 49476 290 150 70 400 400 n/a 80mm 100mm 125mm 107 — — * Bases on Universal Columns are provided with two sets of mounting holes, to t grids or T-Slots on 80mm and 100mm centers. Custom mounting patterns and base sizes are available upon request. Torque Clamping Force ft. lbs N•m lbs kgf 20 27 3,600 1,630 30 41 4,500 2,040 40 54 5,300 2,400 50 68 6,200 2,800 60 81 7,200 3,250 70 95 8,400 3,800 80 108 9,200 4,150 90 122 10,100* 4,550* *Recommended Maximum PRODUCTION VISES PRODUCTION VISES workholding solutions Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: info@jergensinc.com | www.jergensinc.com 157
RkJQdWJsaXNoZXIy NzI2NjY=