Swing Cylinders Accessories • Standard with an arm • Can be mounted using four #10 cap screws or the 1"-12 thread on the O.D. of the cylinder • Optional components include the threaded mounting bracket and jam nut shown below • Can be used as a non-rotating clamp • Maximum recommended ow rate is 20 cubic inches per minute per clamp (approximately 1 second clamp time) • Note: Arm length can affect clamping pressures. See chart at right for more information. WARNING: All swing cylinders must be used with flow limit valves to dampen the rotating action. Please see maximum flow rate shown below. These versatile swing cylinders/clamps can be used as single or double acting rotating clamps, or push/pull cylinders. The piston in the Swing Cylinders rotate 90° to the right, but may easily be changed to 90° left rotation, or to no rotation at all. Double Arm Speci cations 60680Swing Cylinder Clamp (Pull) Return (Push) Operating Volume (cu in) .18 .33 Effective Piston Area (sq in) .24 .44 Minimum Operating Pressure (psi) 120 — Maximum Operating Pressure (psi) 3000 3000 Maximum Output Force (lbs) 730 1320 Stroke (in): Full .75 .75 Rotating .50 .50 Clamping .25 .25 Weight (lbs) 1 1 See page 188 Description Part Number Hex Jam Nut 60964 Optional Double Arm 60923 POWER CLAMPING workholding solutions POWER CLAMPING Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA 178
RkJQdWJsaXNoZXIy NzI2NjY=