Self Aligning Washers (Two-Piece) Stainless Steel • Material: 303 Stainless Part Number A B C E Bolt Size Wt. (lbs) 41202 3/16 5/8 9/32 3/4 1/4 .01 41203 1/4 3/4 11/32 1 5/16 .01 41204 1/4 7/8 13/32 1 1/4 3/8 .03 41205 5/16 1 1/8 17/32 1 1/2 1/2 .08 41206 5/16 1 3/8 21/32 1 3/4 5/8 .13 41207 3/8 1 5/8 25/32 2 1/4 3/4 .20 USS + SAE = USAE™ What is a USAETM Washer? • It is a simple but effective idea that is long overdue. • The Outside Diameter conforms to USS standards. This provides a washer that is up to 36% larger than standard hardened washers. More Contact Area = More Holding Power • The Inside Diameter conforms to SAE standards. The small ID provides a more precise t on bolts, studs, etc. • USAE Washers are also up to 37% thicker than standard hardened washers for greater strength. • Washers are made from mild steel. They are case hardened to 60 HRc and have a black oxide nish. • Bolt size is stamped on each washer for easy identi cation. USAE™ Heavy Duty Flat Washers USAE™ Heavy Duty Flat Washers Part Number Bolt Size A (OD) B (ID) C (Thickness) FW00001 1/4 3/4 9/32 9/64 FW00002 5/16 7/8 11/32 9/64 FW00003 3/8 1 13/32 9/64 FW00004 1/2 1-3/8 17/32 5/32 FW00005 5/8 1-3/4 21/32 5/32 FW00006 3/4 2 13/16 1/4 FW00007 1 2-1/2 1-1/16 1/4 *Tolerances for all dimensions are +/- .010” WORKHOLDING COMPONENTS WORKHOLDING COMPONENTS workholding solutions Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: info@jergensinc.com | www.jergensinc.com 291
RkJQdWJsaXNoZXIy NzI2NjY=