LOW PROFILE CLAMPING Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: info@jergensinc.com | www.jergensinc.com 313 LOW PROFILE CLAMPING workholding solutions OK-Vise® Tungsten Carbide Coated Jaw Clamps These clamps feature a high friction tungsten carbide coating on the clamping faces of the jaws. They are an ideal choice when clearly visible clamping marks are not allowed on the workpiece but high friction is still needed. High friction holding can be attained with lower clamping forces making these well suited for thin wall parts that are prone to distort under high loads. The tungsten carbide jaws are specifically engineered to securely hold your workpiece without leaving any visible marks or scratches. Note: Part No. DK2-VTI-D measurements are given in inches & pounds Part Number Unit A Minimum (mm) A Optimum (mm) A Maximum (mm) B (mm) C (mm) D (mm) E (mm) Socket Head Screw DIN 912 Jaw Clamping Force (kN) Tightening Torque (Nm) Hardness of Jaws HRC Weight (g) AK2-VT-DO Metric 20 23 25 22 11 15 4.2 M5 x 25 10 10 60 22 BK2-VT-D Metric 27 29 31 29 15 21 2.5 M8 x 20 25 44 60 55 DK2-VT-D Metric 42 45 49 41 22 30 4 M12 x 30 65 145 60 180 FK2-VT-D Metric 57 60 64 56 29 42 5 M16 x 40 110 360 60 465 Metric Part Number Unit A Minimum (In) A Optimum (In) A Maximum (In) B (In) C (In) D (In) E (In) Socket Head Screw DIN 912 Jaw Clamping Force (lbs) Tightening Torque (ft/lbs) Hardness of Jaws HRC Weight (lbs) DK2-VTI-D Inch 1.65 1.77 1.92 1.61 0.86 1.18 0.15 1/2-13 x 1 1/4" 14612 107 60 0.4 Inch
RkJQdWJsaXNoZXIy NzI2NjY=