Adjustable Micro Clamps decrease design and set-up times for modular fixtures, work cubes, and standard fixtures. Without changing hole locations, clamping range from 12mm to 35mm can be achieved. The clamps are available with either smooth or serrated faces which make them ideal for clamping machined parts, castings, and rough cut stock. The clamps work with a cam action, always following the contour of the workpiece for maximum surface contact. Locking Screw is 1/2-13 for inch sizes and 12M for metric sizes; total distance of movement is .100". Adjustable Micro™ Clamps Measured from the centerline, each face of these low profile clamps increases 1mm (.0394) from the smallest to the largest face. • Cam action • Low profile • Available in four sizes • Heat treated and plated • Serrated or smooth edges • Adjustable clamps and stops • Includes Cam Screw* Inch Part Number Metric Part Number Description 68601 68651 1-6 smooth 68602 68652 7-12 smooth 68603 68653 13-18 smooth 68604 68654 19-24 smooth 68611 68661 1-6 serrated 68612 68662 7-12 serrated 68613 68663 13-18 serrated 68614 68664 19-24 serrated All clamps include a cam screw. Clamps are 10mm (.394) thick. Part Number Thread Max. Torque Holding Force 68202 Cam Screw 1/2-13 65 Ft/lbs. – 4000 lbs. 68199 Cam Screw M12 88N.M. – 17,800 N. Face # Distance From Center Line Face # Distance From Center Line Face # Distance From Center Line Face # Distance From Center Line 1 .......... 12mm (.4724) 2 .......... 13mm (.5118) 3 .......... 14mm (.5512) 4 .......... 15mm (.5906) 5 .......... 16mm (.6299) 6 .......... 17mm (.6693) 7 ..........18mm (.7086) 8 ..........19mm (.7480) 9 ..........20mm (.7874) 10 ........21mm (.8268) 11 ........22mm (.8661) 12 ........23mm (.9055) 13 ........ 24mm (.9449) 14 ........ 25mm (.9842) 15 ........ 26mm (1.0236) 16 ........ 27mm (1.0630) 17 ........ 28mm (1.1024) 18 ........ 29mm (1.1417) 19 ........ 30mm (1.1811) 20 ........ 31mm (1.2205) 21 ........ 32mm (1.2598) 22 ........ 33mm (1.2992) 23 ........ 34mm (1.3386) 24 ........ 35mm (1.3780) LOW PROFILE CLAMPING Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA 364 LOW PROFILE CLAMPING workholding solutions
RkJQdWJsaXNoZXIy NzI2NjY=