Floating Pull Stud Hardened for hydraulic and pneumatic clamping modules Part Number Size ØDN ØD2 H1 Wt. (g) 340059 K10 21.8 12.0 16 25 305912 K20 31.8 15.5 23 80 426882 K40 39.8 20.0 29 160 Note: The oating pull stud is supported by bearings so that it is axially mobile and is used when large distance and angle tolerances between the stud holes have to be compensated. The stud has only a holding function and does not take on any lateral load. Engagement Screw For Floating Pull Stud Strength class 10.9 Part Number Size ØD2 M L L1 L2 L3 Wt. (g) 340034 K10 11.0 M8 x 1.25 35 6 16.1 12.9 24 305938 K20 13.5 M10 x 1.5 50 9 23.1 17.9 55 426908 K40 17.0 M12 x 1.75 59 10 29.1 19.9 100 Pull Stud Clamping Nuts Engagement Screws For Pull Studs Strength class 10.9 For installation and surface mounted clamping modules Part Number Size M L L1 Wt. (g) 306092 K5 M6 x 1.0 25 3.4 18 303578 K10 M8 x 1.25 37 6.0 30 303222 K20 M12 x 1.75 54 9.0 70 303230 K40 M16 x 2.0 69 10.0 130 Part Number Size M SW H Wt. (g) 429969 K5 M6 x 1.0 10 6 3 429985 K10 M8 x 1.25 14 8 8 430009 K20 M12 x 1.75 21 14 26 430025 K40 M16 x 2.0 28 17 50 ZERO POINT MOUNTING SYSTEM workholding solutions QUICK CHANGE FIXTURING - ZERO POINT MOUNTING SYSTEM Jergens, Inc. | 15700 S. Waterloo Road | Cleveland, Ohio 44110-3898 USA 50
RkJQdWJsaXNoZXIy NzI2NjY=