Flange Type Installation Modules with Centering and Cover Rings Hydraulic Release Cover and piston hardened. Repeatability < 0.005 mm (0.0002") All linear dimensions in (mm) Note: Combines features of the Threaded Module and Raised/Mounted module. Especially designed when installation space is limited and base plate or angle plate has relatively thin dimensions. The positioning of the module is simple and accurate when using the precision ange diameter. Pneumatic supply is possible by manifolds or pipes/hoses. Pneumatic pressure is needed for unclamping ( min 8 bar/ 116 psi, max 12 bar/ 175 psi). For clamping process pneumatic pressure of min 5 bar / 75 psi, max 6 bar / 90 psi is required brie y in order to achieve de ned pull-in force. The installation clamping module is mechanically locked in the clamped position. The unique mechanical locking system results in virtually no vibration even with extensive machining forces. The pneumatic design has 2 connections: 1 x unclamping / 1 x clamping. Hardened Stainless Steel Hardened Stainless Steel Pneumatic Release Cover and piston hardened. Repeatability < 0.005 mm (0.0002") Part Number Size Pull-In/Locking Force up to kN / (lbs) Holding Force kN / (lbs) Blow out ØDA ØDN ØD1 HA K ØLK M R T Kg 480327 K10 8 / (1800) 25 / (5620) — 100 22 67 24 9 90 M5 G1/8 5.9 1.35 480285 K20 17 / (3800) 55 / (12350) — 136 32 100 35 13 124 M6 G1/8 8.9 4.97 480749 K40 30 / (6700) 105 / (23600) — 180 40 120 45 15 163 M6 G1/8 11.9 4.97 Part Number Size Pull-In/Locking Force up to kN / (lbs) Holding Force kN / (lbs) Blow out ØDA ØDN ØD1 HA K ØLK M R T Kg 480301 K10 10 / (2250) 25 / (5620) Yes 100 22 67 24 9 90 M5 G1/8 5.9 1.35 480269 K20 20 / (4500) 55 / (12350) Yes 136 32 100 35 13 124 M6 G1/8 8.9 3.76 480723 K40 40 / (9000) 105 / (23600) Yes 180 40 120 45 15 163 M8 G1/8 11.9 4.97 All linear dimensions in (mm) Note: Combines features of the Threaded Module and Raised/Mounted module. Especially designed when installation space is limited and base plate or angle plate has relatively thin dimensions. The positioning of the module is simple and accurate when using the precision ange diameter. Hydraulic supply is possible by manifolds or pipes/ hoses. Hydraulic supply and pressure is only needed for unclamping (min. 50 bar / 725psi, max. 60 bar / 870psi). The module is mechanically locked in the clamped position. The unique mechanical locking system results in virtually no vibration even with extensive machining forces. The hydraulic design has 1 connection: 1 x unclamping. QUICK CHANGE FIXTURING - ZERO POINT MOUNTING SYSTEM ZERO POINT MOUNTING SYSTEM workholding solutions Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: info@jergensinc.com | www.jergensinc.com 59
RkJQdWJsaXNoZXIy NzI2NjY=