Rectangle Riser Tapered Flanged Riser Straight Flanged Riser Square Riser Tapered Flanged Steel Riser Straight Flanged Steel Riser Rectangle Steel Riser Tapered Flanged Riser * 200mm risers are designed to work with rotary tables. If intended for use on QLS subplates, 4 extra mounting holes are needed. Call 877-426-2504 for assistance. SQ Riser & Pallet Part Number Style A (mm) B (mm) C (mm) D (mm) E Bottom Center Bore Mounting Type Grid Weight lbs (Kg) Steel Aluminum Steel Aluminum 5RS250003 5RS250007 Tapered Flanged 250 — 75 130 50H7 QLS, 12mm SHCS 50mm x 50mm 36.8 (16.7) 12.75 (5.78) 5RS250004 5RS250008 Tapered Flanged 250 — 125 130 50H7 QLS, 12mm SHCS 50mm x 50mm 53.2 (24.1) 18.42 (8.36) 5RS150001 5RS150002 Rectangle 250 300 100 150 50H7 QLS, 12mm SHCS 50mm x 50mm 87.0 (39.5) 30.67 (13.9) 5RS250009 5RS250010 Square 250 250 100 250 50H7 QLS, 12mm SHCS 50mm x 50mm 77.3 (35.1) 28.0 (12.7) 5RS200007* 5RS200010*Straight Flanged 200 — 75 130 50H7 QLS, 12mm SHCS 12mm x 50mm 24.0 (10.9) 8.4 (3.8) 5RS200008* 5RS200011*Straight Flanged 200 — 125 130 50H7 QLS, 12mm SHCS 12mm x 50mm 36.0 (16.4) 12.4 (5.6) 5-Axis Risers, Flanged, Rectangle or Square Style – Steel or Aluminum 5-Axis Risers raise, position and locate the part off the machine or rotary table so the part is accessible for machining all 5 sides. Mounts direct to QLS grid or tables with Locating Keys and LHCS. Mount to subplates with center bore, timing pin and LHCS or QLS shoulder screws. █ Material: 1018 Steel or Aluminum █ Thickness Tolerance ±0.002 (.05mm) █ Flat & Parallel within: .0005 (.013mm) █ Finish: Black Oxide or Anodize Square and Rectangle Risers – For use with 3-axis VMC’s and 4-axis HMC’s to reduce spindle dead zones. Mounts to table using T-Slots with SHCS & Jergens Sine Fixture Keys, or Locating Pins and Keys. = Jergens QLS Quick Locating System (QLS) Bushings are hardened and ground for accurate and repeatable setups. Use in combination with 12mm QLS dowel pins or shoulder screws. MULTI-AXIS WORKHOLDING Phone: 877-426-2504 | Fax: +1 216-481-6193 | E-mail: info@jergensinc.com | www.jergensinc.com 75 workholding solutions MULTI-AXIS WORKHOLDING
RkJQdWJsaXNoZXIy NzI2NjY=